The Pre-Ship Inspection Checklist: Last Checks Before the Truck Comes

Most used-equipment grief is discovered in the first hour at the buyer's yard — and by then the machine has crossed three states, the wire has cleared, and every finding is a negotiation instead of a condition of sale. The pre-ship inspection exists to move those discoveries back across the line, to the moment when they are still the seller's responsibility. Whether you run it in person or demand it in photos and video, it is the same list.

The fifteen points

  • 1. Serial plate photographed against the invoice and, where applicable, the title. The machine that ships must be the machine you bought — plate, not paint color, is identity.
  • 2. Hour meter photographed same-day, with a timestamp. Hours at loadout should match hours at purchase; a yard that used "your" machine for three weeks after payment should say so.
  • 3. Fluids checked cold: engine oil level and color, coolant level and color (oil sheen in coolant stops the shipment), hydraulic level with booms parked in the listing position.
  • 4. Walkaround video, one take, all four sides, close on each tire or track, under the belly for fresh drips on the pad.
  • 5. Cold start on camera — the continuous-take protocol: walk-up, cold-metal touch, crank, two minutes of idle, gauge pan.
  • 6. Every function to its stops: boom, dipper, bucket curl, auxiliary circuits, swing both directions, travel forward and reverse, steering lock to lock. Thirty seconds per function finds what a parked walkaround cannot.
  • 7. Drift test: loaded bucket held, stabilizers down, boom at half height, engine off, two minutes. Sag is an internal cylinder problem shipping toward you.
  • 8. Brakes and parking brake proven on the yard's own slope or against gentle throttle.
  • 9. Electrical sweep: every switch flipped on camera — lights, beacon, wipers, horn, backup alarm, HVAC fan. Small circuits predict harness health.
  • 10. Warning lights after warm-up, panned slowly. A regen light or a flash code is cheap to ask about now and expensive to inherit.
  • 11. Attachments listed and photographed: every bucket, set of forks, and coupler on the invoice staged next to the machine. Attachments are the most commonly "forgotten" items in loadout history.
  • 12. Keys, manuals, and codes: count the keys, locate the operator's manual, and get any security or telematics codes in writing.
  • 13. Grease before transport — a reasonable ask, and the response tells you about the yard's habits.
  • 14. Loadout photos: machine chained on the trailer, from both sides. These date-stamp the condition at the moment custody changed — your evidence if transport damage appears.
  • 15. Paper packet confirmed before the truck leaves: bill of sale, title or ownership document as applicable, and the transporter's name and number in your hands, not promised for next week.

Remote buyers: same list, different medium

Every point above survives translation into photos and video. Ask for the list in one email so nothing is "the other guy's job," and expect the responsive yards to turn it around inside a day or two — the organized ones already shoot most of it as routine. We have seen Florida yards like Turner Truck & Equipment in Arcadia stage a machine and return the full packet on request; a seller anywhere who treats the request as an insult is telling you how after-sale questions will be treated too.

Calling the verdict

Ship it when all fifteen come back clean, or when the exceptions are documented and priced before loadout. Hold the truck for coolant contamination, drift on a primary cylinder, warning lights nobody can explain, or paperwork that is "following separately." A held truck costs a day. The alternative costs the whole margin of the deal — and the leverage went with the trailer.